Home SAFETY PRODUCTS Guide to hard hat accessories: What you can and can’t wear

Guide to hard hat accessories: What you can and can’t wear

As the weather gets cooler, you might be starting to
think about beanies and other cold weather gear to keep yourself warm.

However, if you need to wear a hard hat for work,
your accessories could be putting you at risk of an injury by reducing the
effectiveness of your PPE.

As well as their compliance with Australian
standards, hard hats and other PPE rely upon an adequate user fit to protect
the wearer.

Any additional accessories or clothing which affect
fit could reduce the hard hat’s ability to keep you safe.

This also applies to wearing other PPE with hard
hats, such as safety glasses, and highlights the importance of choosing
appropriate equipment for the task and user, including testing the fit of PPE
together beforehand.

But while you shouldn’t ever leave off necessary PPE,
when it comes to other add-ons, how do you decide if it’s safe to wear granny’s
knitted beanie under your hard hat?

First and foremost, always follow the manufacturer’s
instructions. If the manufacturer says don’t do it… don’t do it!

But where they haven’t specified if something is
allowable, you will have to conduct your own risk assessment.

To help you out, we’ve put together a quick guide
with some hard hat accessory dos and don’ts.

1. No pom-poms!

If your granny’s beanie has a pom-pom, then it’s out.
The same goes for turbans, sombreros, high ponytails (not an accessory, but
still worth mentioning) and anything else which gives your hard hat too much
extra lift.

Unfortunately, all of these kinds of headwear make
the hard hat unstable, increasing the likelihood of it sitting incorrectly on
your head and failing to adequately protect you in an accident.

If the added accessory doesn’t sit smoothly against
your head, then it’s not a good idea to wear it.

2. Choose
winter liners and flat-top beanies.

Winter liners – a balaclava style headwear – and
flat-top beanies are generally appropriate to wear under hard hats, although
you should conduct a fit test yourself.

As long as they are close-fitting, without any metal
pieces, and do not obstruct the fit or stability of the hard hat, then they can
keep your head warm all through winter.

However, always remember to conduct a fit test before
starting the job.

3. No caps… or
metal!

While they sit closer to your head, most baseball
caps come with a metal stud or button on the top which could prove dangerous.

In the event of an impact, the metal button could be
driven into your skull, causing an injury that would not otherwise have
occurred.

Additionally, if the face visor of the cap is curved,
it may prevent the hard hat from being fitted correctly.

So avoiding caps (and any metal) under your hard hat
is definitely the way to go.

4. Sun and
sweat protection is a go.

While caps are out, cotton/polyester or plastic
visors, brims and flaps which attach to the helmet are a great solution to
staying sun safe throughout summer.

Make sure you read the manufacturer’s instructions to
ensure that you’re using them correctly and with the right type of hard hat.

And if you want to use a soft sweat band to keep the
sweat out of your eyes, that will typically fit easily with a hard hat as well.

5. Straps and
lamps

Adding a strap or lamp to your hard hat could improve
your safety, however make sure to fit these accessories correctly.

It’s always best to buy your hard hat and these types
of accessories from the same manufacturer to ensure a better fit, rather than
mixing different brands.

Buy one of ProChoice’s new beanies to keep your head warm this winter and check out our other hard hat accessories here.

Most Popular

Communication methods key to successful driver recruitment

The trucking industry could be short up to 160,000 drivers by 2028, according to the American Trucking Associations. That projection — coupled with pandemic-fueled...

Nodeon wins TLEX contract as Finnish city implements C-ITS

Finnish smart mobility specialist Nodeon has signed its first contract to implement Monotch’s Traffic Live Exchange (TLEX) platform in Tampere, Finland’s third-largest city. Tampere and...

The Dangers of Workplace Complacency

Workplace complacency is a common threat to safety. Repeating the same jobs, again and again, can cause employees to not take the proper safety...

Chris Pratt explains importance of correctly portraying military ahead of ‘The Terminal List’ drop

NEWYou can now listen to Fox News articles! Chris Pratt explained the importance of correctly and honorably portraying the military ahead of the...